Air Force Function

Crossfader suppressor connection instructions.

Alpah cares ....that's why we made the CFS1 so that you may save your cash!

Crossfader Noise Suppressor

How to connect CFS1 Suppresor

It could be obvious how to gain access if you have replaced a crossfader before.

The CFS1 is connected in line with the crossfader.

1. Remove the crossfader fixing plate screws and lift out.

2. Disconnect the crossfader from the mixer (crossfader cable).

3. Connect the lead from the mixer to the CFS1 Pin end.

4. Connect the CFS1 socket to the crossfader.

5. Connect the PP3 Battery (provided).

6. Place the CFS1 unit and the battery inside the crossfader hole cutout in mixer front panel.

Mixers with very narrow crossfader hole cutout it may be necessary to remove the front panel to place the entire CFS1 inside the mixer.